4 reasons why you should build your own mechanical keyboard

For one thing, you’ll get a better keyboard because of it!

I’ve been using a mechanical keyboard for as long as I can remember, but it wasn’t until recently that I started making custom keyboards instead of buying them off the shelf. In fact, my quest to find a good mechanical keyboard ended when I built my own.


As I’ve found in my travels, it’s almost always better to buy a custom keyboard instead of getting a pre-built one. And you don’t need a lot of technical knowledge, either! This is why you should consider going to the water.

1 You can choose your own

The whole process of making a keyboard starts with a base, which you can improve over time to make it perfect. I recommend choosing a DIY kit, sometimes called a barebones kit, if you are new to the world of keyboards, as they include all the major components. Sure, you can buy a standard keyboard fully assembled, but if you get a barebones kit, you can customize all the parts to suit your needs. Everything from the case and plate materials to how the plate is mounted on the frame can make a huge difference in performance and sound. You can’t change this in most popular keyboards that come pre-designed.

For example, there are Tofu60 2.0 kits from KBDfans or any of the original kits from Mode Designs that arrive at your door in parts. Alternatively, you can go with a more barebones model, say, the Keychron Q1 Pro, which lets you wear your own keys and switches but comes in many cases. These color types are customizable, however, you can differentiate between them.

Also Read:  ASUS ROG FX503 Gaming Laptop Review 2023

You can always pick up tools that use a gasket instead of a plate to write more smoothly. You can also play with the acoustics of the keyboard by experimenting with plate materials, foam, and other modifications. You can order many of these parts at the same time as your equipment, but there are stores that specialize in specific parts, such as stabilizers, sockets, and other accessories.

2 Check the different switches

Switches are undoubtedly the heart of a keyboard, and choosing the right switch can be overwhelming with the sheer number of options out there. Your keyboard kit may come with switches, but there’s no need to go stock. I’m not saying that all the switches you get with a built-in keyboard are bad or unusable, but you open yourself up to a huge selection of mechanical switches by choosing your settings.

For example, if you like the stock switches that come with your keyboard, wait until you try something like Gateron Oil King or Milky Yellow Pro switches. The new Cherry MX2A update also looks very promising as a iteration of the very popular Cherry MX line. Those who tend to lean more towards tactile switches might consider trying something like the Durock T1 or the Akko Jelly Blue. These aren’t the most expensive switches out there, but they’re better than what most keyboards carry, which shows that you don’t have to spend a fortune to get what you want.

Gateron Oil King change

These are 5-pin mechanical switches that can easily be installed on a keyboard with a PCB that accepts MX-type switches. These linear switches have 55g springs, and are tuned for optimal performance.

$53 for Amazon Akko Jelly Blue switches

Budget switches from Akko have a square shape that reduces the vibration of the switches and prevents dust from entering. These switches have 40g springs for light and comfortable typing.

Also Read:  How to upgrade the storage on the Lenovo Slim 7i (2023)

$17 at Amazon

Alternatively, you can buy test packs of switches for a few bucks before committing to a good chunk of a full set of switches. Just make sure you get a kit with a hot plate PCB that allows you to easily replace the switches with a switch puller, and you should be good to go. Using custom switches means you also have the option of hand-painting them for better typing.

3 Customize to your satisfaction

This section is all about putting “custom” into the default keyboard. It could be something as basic as the keycaps you put on the switches or something more advanced like springs, but all of them can change what you write. Of course, you can add keycaps or use a standard cable with your existing keyboard, but you may hit a wall when you try to replace an already built-in keyboard. There are a ton of different things to consider, such as switching switches, interrupts, layout support, keycaps history, and more, so it’s best to use it on your board so you can choose the parts that fit.

Also, you can change it later. Even the tuning and placement of the exercises that go into your keyboard can make a big difference because they can eliminate the small noises that come from the big keys, like the space bar. Or adding foam inside the equipment can reduce the overall echo. There are many things you can do.

Here’s the keyboard I was able to put together from scratch, from 3D printing the case in a color that matches my theme to choosing the right switches to go with the mounting style and aluminum plate.

Also Read:  R.I.P. Microsoft Surface (at least as we knew it)

Close it

The pre-built keyboards that are readily available from popular brands leave a lot of room for customization and customization, forcing you to stop at something new instead of just replacing one component that you don’t like or want to upgrade. .

4 Leave extra space for later

The best thing about a DIY project like this is that you learn about something while using it, so you can always go back and change something or make it even better. This is better and cheaper in the long run than replacing the board. You can also plan your upgrades and upgrades over time to turn even a budget device into a keyboard that looks a lot better than a $200 flagship model.

Also, not all keyboards and their upgrades are worth the cost. You can pick up a customizable keyboard for as little as $75, and it will fit well with most devices. There are many budget brands out there that offer great value for money. Almost all modern tools are easy to use and easy to assemble, so you don’t need much knowledge or expertise to complete the construction.

Build your next keyboard instead of buying one

I often draw parallels between designing a keyboard and a standard PC. Like a PC, you’re buying a base or platform that can be upgraded to be better – or more powerful – than you first thought. I remember turning my humble Keychron K2V2 into an impressive keyboard just as I turned my budget PC into a better option over the years. It’s about the experience and tweaking things you like instead of settling for whatever the manufacturer thinks is best for you. You can also have a great and exciting new product at the end of it all.

Categories: Reviews
Source: thptvinhthang.edu.vn